Home>mall>Tools, Industrial & Scientific
0Thaitin

Hantek DSO5102P USB Digital Storage Oscilloscope 2Channels 100MHz 1GSa/s

4.4
★★★★★
236
$499.99 /$609.99
  • *Name:

  • *Email:

  • *Phone:

  • *Quantity:

  • *Content:

  • Attachment:

    Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

$284.99 /$609.99

Seiceáil Slán Ráthaithe

Bronntanas Saor in Aisce
Bronntanas saor in aisce le haon cheannach
Polasaí Loingseoireachta
Loingseoireacht chaighdeánach saor in aisce ar orduithe os cionn $9.9
Polasaí Fillte
Glacfar le míreanna a fhillfear laistigh de 40 lá ón dáta a fhaigheann tú na hearraí. Ní féidir míreanna saincheaptha a fhillt nó a mhalartú. Ní féidir míreanna a ceannaíodh le cárta bronntanais leictreonach a fhillt; ní bhaineann aisíocaíochtaí leo.

Bronntanas Saor in Aisce

Fáilte go Roymall, do shuíomh gréasáin gairmiúil chun bronntanais ollmhargaidh préimhe a cheannach. Táimid thar a bheith buíoch as do thacaíocht, agus ba mhaith linn ár mbuíochas a chur in iúl trí bhlas breise spraoi a chur le do cheannacháin. Nuair a cheannaíonn tú linn, ní hamháin go mbaineann tú taitneamh as táirgí ar ardchaighdeán a fheabhsaíonn do stíl mhaireachtála, ach gheobhaidh tú bronntanas saor in aisce eisiach le gach ordú a chuirfidh tú. Réidh chun iniúchadh a dhéanamh ar ár mbailiúchán agus na bronntanais foirfe a aimsiú? Déan iniúchadh ar ár rogha earraí ollmhargaidh préimhe, cuir d'ordú, agus bí ag súil le spraoi do bhronntanais saor in aisce ag teacht in éineacht le do cheannach.

Polasaí Loingseoireachta

Oibreoimid go dian chun earraí a sheachadadh chugat tar éis d'orduithe a fháil agus a chinntiú go sroicheann siad slán sábháilte. Soláthrófar sonraí seachadta i do ríomhphost deimhnithe.I bhformhór na gcásanna, déantar orduithe a phróiseáil laistigh de 2 lá. Faoi imthosca speisialta, déanfar moill air mar seo a leanas: Nuair a chuireann tú ordú Dé Sathairn, Dé Domhnaigh nó laethanta saoire poiblí, déanfar moill 2 lá air.De ghnáth, teastaíonn 5-7 lá oibre (Dé Luain go Dé hAoine) gan a bheith faoi thionchar moill eitilte nó tosca comhshaoil eile.Toisc go bhfuil ár seirbhís loingseoireachta ar fud an domhain, beidh amanna seachadta ag brath ar do shuíomh, mar sin d'fhéadfadh sé go mbeadh cúpla uair ag teastáil agus fan go foighneach má tá tú i gceantair nó tíortha iargúlta.

1. Polasaí Fillte & Malartaithe

Glacaimid le míreanna a ceannaíodh ar roymall.com amháin. Má cheannaíonn tú ónár ndáileoirí áitiúla nó miondíoltóirí eile, ní féidir leat iad a fhillt orainn. Ní ghlactar le míreanna díolacha deiridh nó bronntanais saor in aisce le fillt.Chun bheith incháilithe le fillt, ní mór do mhír a bheith gan úsáid agus sa chéad chaoi a fuair tú í. Ní mór í a bheith sa phacáistiú bunaidh freisin.Tar éis treoracha fillte a fháil uainn, déan do mhíreanna fillte a phacáistiú agus do phacáiste a scaoileadh ag oifig an phoist áitiúil nó ag seachadóir eile.
Déanfaimid do mhír fillte nó malartaithe a phróiseáil laistigh de 3-5 lá oibre tar éis dúinn í a fháil. Déanfar an t-aisíoc a phróiseáil agus a chreidiúint go huathoibríoch chuig do bhunmhodh íocaíochta.Ní féidir aon fhillt nó malartuithe a ghlacadh má táirgeadh an táirge go saincheaptha, lena n-áirítear méid saincheaptha, dath saincheaptha, nó cló saincheaptha.An bhfuil cabhair bhreise uait, déan teagmháil linn. service@roymall.com nó Whatsapp: +8619359849471

2. Polasaí Aisíocaíochta

Gheobhaidh tú aisíoc iomlán nó creidmheas siopa 100% tar éis dúinn an pacáiste fillte a fháil agus a sheiceáil. Déanfar an t-aisíoc a phróiseáil agus a chreidiúint go huathoibríoch chuig do bhunmhodh íocaíochta.Tabhair faoi deara nach bhfuil costais loingseoireachta agus aon dleachtanna nó táillí incháilithe le haghaidh aisíocaíochta. Ní féidir na costais loingseoireachta breise a aisíoc nuair a sheoltar an pacáiste. Tá tú freagrach as na táillí seo a íoc agus ní féidir linn iad a aisíoc nó a aisíoc, fiú má fhilltear an t-ordú ar ais chugainn.Nuair a fhaighimid agus a dheimhnímid do mhír fillte, seolfaimid ríomhphost chugat chun a chur in iúl duinn go bhfuairimid do mhír fillte. Cuirfimid in iúl duit freisin faoi cheadú nó diúltú d'aisíocaíocht.Má tá aon fhadhb agat maidir leis an bpróiseas aisíocaíochta, déan teagmháil linn. service@roymall.com nó Whatsapp: +8619359849471

Feature:

  • 200/100/70MHz bandwidths

  • 1GSa/s Real Time sample rate

  • Large (7.0-inch) color display, WVGA(800x480)

  • Record length up to 40K

  • Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.

  • USB host and device connectivity, standard

  • Multiple automatic measurements

  • Four math functions, including FFTs standard

  • Provides software for PC real-time analysis


  • Model

    DSO5102P

    Acquisition

    Sample Rate

    Real-Time Sample: 1GS/s

    Acquisition Modes


    Normal

    Normal data only

    Peak Detect

    High-frequency and randon glith capture

    Average

    Wavefom Average, selectable 4,8,16,32,64,128

    Inputs

    Inputs Coupling

    AC, DC, GND

    Inputs Impendance

    1Mu03a9u00b12%u201620pFu00b13pF

    Probe Attenuation

    1X, 10X

    Supported Probe Attenuation Factor

    1X, 10X, 100X, 1000X

    Maximum Input Voltage

    CAT I and CAT II: 300VRMS (10u00d7), Installation Category;
    CAT III: 150VRMS (1u00d7);
    Installation Category II: derate at 20dB/decade above 100kHz to 13V peak AC at 3MHz* and above. For non-sinusoidal waveforms, peak value must be less than 450V. Excursion above 300V should be of less than 100ms duration. RMS signal level including all DC components removed through AC coupling must be limited to 300V. If these values are exceeded, damage to the oscilloscope may occur.

    Horizontal System

    Sample Rate Range

    500MS/s--1GS/s

    Waveform Interpolation

    (sin x)/x

    Record Length

    40K

    SEC/DIV Range

    4ns/div to 40s/div

    Sample Rate and
    Delay Time Accuracy

    u00b150ppm(at over any u22651ms time interval)

    Position Range

    20ns/div to 80us/div; (-8div x s/div) to 40ms;
    200us/div to 40s/div; (-8div x s/div) to 400s

    Time Measurement Accuracy
    (Full Bandwidth)

    Single-shot, Normal mode:u00b1 (1 sample interval +100ppm u00d7 reading + 0.6ns);
    >16 averages:u00b1 (1 sample interval + 100ppm u00d7 reading + 0.4ns);
    Sample interval = s/div u00f7 200

    Vertical System

    Vertical Resolution

    8-bit resolution, all channel sampled simultaneously

    Position Range

    2mV/div to 10V/div

    Bandwidth

    100MHz

    Rise Time at BNC( typical)

    3.5ns

    Analog Bandwidth in Normal and Average modes at BNC or with probe, DC Coupled

    2mV/div to 20mV/div, u00b1400mV; 50mV/div to 200mV/div, u00b12V
    500mV/div to 2V/div, u00b140V; 5V/div, u00b150V

    Math

    +, -, *, /, FFT

    FFT

    Windows: Hanning, Flatop, Rectamgular, Bartlett, Blackman;
    1024 sample point

    Bandwidth Limit

    20MHz

    Low Frequency Response (-3db)

    u226410Hz at BNC

    DC Gain Accuracy

    u00b13% for Normal or Average acquisition mode, 5V/div to 10mV/div;
    u00b14% for Normal or Average acquisition mode, 5mV/div to 2mV/div

    DC Measurement Accuracy,
    Average Acquisition Mode

    When vertical displacement is zero, and N u226516:u00b1 (3% u00d7 reading + 0.1div + 1mV) only 10mV/div or greater is selected;
    When vertical displacement is not zero, and Nu226516: u00b1 [3% u00d7 (reading + vertical position) + 1% of vertical position + 0.2div]; Add 2mV for settings from 2mV/div to 200mV/div; add 50mV for settings from 200mV/div to 5V/div

    Volts Measurement Repeatability,
    Average Acquisition Mode

    volts between any two averages of u226516 waveforms acquired under same setup and ambient conditions

    Trigger System

    Trigger Types

    Edge, Video, Pulse, Slope, Over time, Alternative

    Trigger Source

    CH1, CH2, EXT, EXT/5, AC Line

    Trigger Modes

    Auto, Normal, Single

    Coupling Type

    DC, AC, Noise Reject, HF Reject, LF Reject

    Trigger Sensitivity
    (Edge Trigger Type)

    DC(CH1,CH2):
    1div from DC to 10MHz; 1.5div from 10MHz to 100MHz; 2div from 100MHz to Full;
    DC(EXT):
    200mV from DC to 100MHz; 350mV from 100MHz to 200MHz;
    DC(EXT/5):
    1V from DC to 100MHz;1.75V from 100MHz to 200MHz;
    AC: Attenuates signals below 10Hz;
    HF Reject: Attenuates signals above 80kHz
    LF Reject: Same as the DC-coupled limits for frequencies above 150kHz; attenuates signals below 150kHz

    Trigger Level Range

    CH1/CH2: u00b18 divisions from center of screen;
    EXT: u00b11.2V;
    EXT/5:u00b16V

    Trigger Level Accuracy( typical)Accuracy is for signals having rise and fall times u226520ns

    CH1/CH2: 0.2div u00d7 volts/div within u00b14 divisions from center of screen;
    EXT: u00b1 (6% of setting + 40mV);
    EXT/5: u00b1 (6% of setting + 200mV);

    Set Level to 50%(typical)

    Operates with input signals u226550Hz

    Video Trigger


    Video Trigger Type

    CH1, CH2: Peak-to-peak amplitude of 2 divisions;
    EXT: 400mV;
    EXT/5: 2V

    Signal Formats and Field Rates, Video Trigger Type

    Supports NTSC, PAL and SECAM broadcast systems for any field or any line

    Holdoff Range

    100ns ~ 10s

    Pulse Width Trigger


    Pulse Width Trigger Mode

    Trigger when (< , >, = , or u2260); Positive pulse or Negative pulse

    Pulse Width Trigger Point

    Equal: The oscilloscope triggers when the trailing edge of the pulse crosses the trigger level.
    Not Equal: If the pulse is narrower than the specified width, the trigger point is the trailing edge. Otherwise, the oscilloscope triggers when a pulse continues longer than the time specified as the Pulse Width.
    Less than: The trigger point is the trailing edge.
    Greater than (also called overtime trigger): The oscilloscope triggers when a pulse continues longer than the time specified as the Pulse Width

    Pulse Width Range

    20ns ~ 10s

    Slope Trigger


    Slope Trigger Mode

    Trigger when (< , > , = , or u2260 ); Positive slope or Negative slope

    Slope Trigger Point

    Equal: The oscilloscope triggers when the waveform slope is equal to the set slope.
    Not Equal: The oscilloscope triggers when the waveform slope is not equal to the set slope.
    Less than: The oscilloscope triggers when the waveform slope is less than the set slope.
    Greater than: The oscilloscope triggers when the waveform slope is greater than the set slope.

    Time Range

    20ns ~ 10s

    Overtime Trigger


    Over Time Mode

    Rising edge or Falling edge

    Time Range

    20ns ~ 10s

    Alternative Trigger


    Trigger on CH1

    Internal Trigger: Edge, Pulse Width, Video, Slope

    Trigger on CH2